Monday, November 20, 2017

Altoid Tin Lid Ornaments

Hello crafty friends!  Last week I had a table set up for a local "3rd Friday"/Holiday Bazaar.  It was coooold and it took the whole weekend to thaw out.

Today I want to share 2 Altoids tin lid ornaments made from leftover paper.  In my last blog post I shared bright Christmas cards made with Blue Fern Vintage Christmas and Vintage Christmas 2.  (I've been hoarding the paper for a while but I think it's from 2015-ish.)

Anyway, I had the ephemera-card-type scraps and layered them into leftover Altoids tin lids!





Neat, huh?  They came together pretty quickly except for Stickles drying time... Oh how I love Stickles!  i used a nail and hammer mat to poke holes for the beaded charm and the hanging string.  Let me know if you have any construction questions -- I'm happy to help!

Thanks for your visit today!

Cheers,
Susan

Thursday, November 2, 2017

New Christmas Cards!

Hi folks!  Just a quick note to let you know I have new Christmas cards in my Etsy shop.  Click here to check them out!




I'll be adding more throughout the month.  Thanks for your visit today!

Cheers,
Susan

Tuesday, October 24, 2017

GSL Cuts Ed. Team: Halloween Art Cards

Hello crafty friends!  I'm here today to share steampunk-y art cards made with Gypsy Soul Laser Cuts ATCs!


Do you know the difference between ATC, ACEO, and art cards?  Lemme tell you my take on all of it.  ATC is short for "Artist Trading Card".  The creation of an ATC has to follow a size rule: 2 1/2" x 3 1/2".  An ATC isn't for sale, rather made for trading with other artists.  It's a great way to collect and share original art!

ACEO is "Art Card, Editions and Originals".  Yes, that's a mouthful!  ACEOs follow the same size rule but are traditionally the sellable version of an ATC.  They can be original works or numbered limited editions.

An art card is basically an ACEO.  I'm just not fancy enough to use ACEO, y'know?

I cut paper for the front and back sides to 2 1/2 x 3 1/2 inches.  Using the last bits of a glue medium I painted it onto the chipboard and added the paper.  Not shown is my brayer -- I rolled it on to smooth out the glue clumps.  You can also use a ruler or anything that will flatten out the paper if needed.



Next, I used the Postage Frames to give dimension to the spooky stamps.  


And that's it!  These were quick projects to make and look neat as a set.  Here's a view of the back sides.



Thanks for your visit today!

Cheers,
Susan


Gypsy Soul Laser Cuts Used
ATCs - set of 3 (coming soon)
Postage Frames D79C

Other Supplies Used
Graphic 45 Steampunk Spells
Cheese cloth
Black and brown inks
Scor-Tape
Ranger Glue n Seal
TH Halloween baubles

Friday, October 13, 2017

More Halloween Cards!

Hello hello!

I'm still in love with this Graphic 45 "Happy Haunting" Halloween paper collection.  Here are a few greeting cards made using it!


Each card has a coordinating gift box and is available in my shop today!





Thanks for your visit today!

Cheers,
Susan

Thursday, October 12, 2017

Halloween Cards

Hiya crafty folks!  I have a series of Halloween keepsake cards using Tim Holtz papers and ephemera.  Fun!


Here are the individual photos.  Each one of a kind card comes with a coordinating gift box is available in the shop.





Thanks for your visit today!

Cheers,
Susan

Wednesday, October 11, 2017

Fright Night Tombstone

Hi creepy crafty friends!  I'm getting ready to do a Halloween table at my local 3rd Friday and have a new bit of tabletop decor to share with you.  Well, new-to-you, anyway.  I found the blank tombstone at a box store last year and promptly made this guy.  I went back and bought a handful (or two) more to make a whole cemetery but this is the only one I have so far... Best laid plans and all!



Here's the other side!



The tombstones are wood and stand 17cm x 12cm (6 1/2" x 4 1/2").  Fun!

Thanks for visiting today.  (This is also available in my Etsy shop in case you can't make it for 3rd Friday. *wink*)

Cheers,
Susan

Tuesday, October 10, 2017

GSL Ed. Team: Halloween Stacking Blocks

Hello crafty folks!  Today I'm sharing a cute set of Halloween-themed stackable Artist Trading Blocks from Gypsy Soul Laser Cuts.


The artist trading block set comes in a package of three graduated sizes.  They are pre-scored and easy to bed into place.


I used clamps to hold each section together while the glue set.  You can see in some of these photos that I punched a hole in the front panel of each.  I was considering knobs or some such embellishment and wanted to have the hole available.  I didn't end up using the holes and the paper covered them nicely.


Once the sides and bottom were dry, I cut a strip of paper to wrap around.  Using a pencil and scoring tool I prepared the paper.  Scoring makes nice corners but isn't critical -- you can easily just use fingers to wrap the paper closely around the corners.


I glued one panel at a time, using the brayer to flatten the glue as much as possible under the paper.  You can also mix your glue with a tiny amount of water and brush it onto the box.

You can see I've cut out my bottom panel. I set the box on top of paper and traced around, then tweaked as needed with a paper trimmer.


The top was traced and tweaked also.  By this time I knew I wasn't going to use the front holes so I could seal the box up.  I started with the front flap, then glued the paper to the top of the box.

One that dried I glued the front flap of each box, using a weight to hold it down while the glue set up.


The next day I decorated with Dresden trim to disguise most of the joints between different paper pieces.


This is a cute set!  I'm looking forward to making a set with Christmas paper, too.


Thanks for visiting today!

Cheers,
Susan

Gypsy Soul Laser Cuts Product
Artist Trading Blocks #H1M

Other Products
Fancy Pants Oct 31 paper
Dresden trim
Tinsel
Tulle
Stickles glitter glue
Rhinestone swirl - Prima
Ranger Glossy Accents
Crafter Pick Ultimate glue
Liquitex matte varnish
TH knob
Preciosa crystal beads

Tuesday, September 26, 2017

GSL Ed Team: RESIST Shrine Grotto

Hello creative friends!  Today on the Gypsy Soul Laser Cuts blog I'm sharing a mixed media art project borne of current news topics as well as individual experiences many of us have endured.  This is a personal piece for me.



If you'd like to see my Shrine Grotto step-by-step, pop on over to the Gypsy Soul Laser Cuts blog!

Here are photos of the shrine without blurred words.  As I said, this project reflects my own inner turmoil.  I edited some of the more derogatory words in the photo above with respect to GSL customers who may be shocked seeing them.  Even blurred, I believe the message is clear.



10/7:  This shrine is now available for purchase in my Etsy mixed media shop.  Click here to go to the listing.

Thank you for visiting today!

Cheers,
Susan

Gypsy Soul Laser Cuts Used
Shrine Grotto D179G

Monday, August 28, 2017

GSL Cuts Ed. Team: Winter Tree

Hello Crafty folks!  I have my August 22nd Gypsy Soul Laser Cuts team post to share with you... er, a few days late.

***

This week here in Maryland the heat indices have been reaching the upper 90s.  It's awfully warm!  I needed a mental break from it and this wintery scene did the trick.


This was a quick project until it came time to make the polymer clay bird.  I tried really hard to make a proper cardinal, but it wasn't in the stars.  We'll just have to use our imagination, 'k?  He's red.

I used the 3 inch 3D Chipboard Tree from Gypsy Soul Laser Cuts.  This tree has delicate branches with tiny connectors.  I pushed my blade into the obvious connectors and held the tree up to a light to find the not-so-obvious ones. It worked like a charm!



The next step was to gesso the whole tree, including the sides.  I used a foam sponge and a lot of patience to go around each branch.  After it dried I double checked the branch edges and filled in missed spots.


On the next layer I dabbed white acrylic paint all over.  Dabbing it on created the tree texture.  I moved the trees off the leftover paint and let them dry on the spatulas.  This step was repeated on the other side.


When dry I put the trees together.  I had to use a straight edge to clear away excess paint from the grooves so the trees were even at the base.

I used a gorgeously weathered clapper from an old wind chime as my base.  A tiny bit of e6000 on the tree holds it to the clapper.  I added bits of moss to finish off the earth.


From tip to toe this is 4 inches tall.  It's so sweet!  I'm now on the lookout for a small glass cloche under which I will tuck this lovely winter scene.


Thanks for visiting today!

Cheers,
Susan

Gypsy Soul Laser Cuts Used
3D Chipboard Tree 3 Inch #C1C

Other Supplies Used
Green moss
White gesso
White acrylic paint
White glue
E6000 glue
Polymer clay
Red acrylic paint

Tuesday, August 8, 2017

GSL Cuts Ed. Team: Love Potion Altered Tin

Hello folks!  Today on the Gypsy Soul Laser Cuts blog I share a lighter version of my year 'round skeleton obsession.  Our friend here is in love and offers you a little magic love potion... don't mind the tombstones over there.  His love lasts an eternity.


I started out with the GSL products I needed to paint/finish with wet stuff.  I cut the tree with a paper cutter.


I knew the skellie would hold something, so I snipped the connector piece at the ribs and left the shoulder bone attached.  Later I reinforced the shoulder bone with a spot of clear glue on the back.


With my typical finger painting style, I covered all the chipboard with white gesso.


I wasn't sure how the tombstones would look at the end, so I started with the general color I was hoping for... The silver was covered over with a Golden micaceous iron oxide later, then I used a tiny bit of white acrylic paint on my finger tip for a weathered marble look.  It worked out even though it doesn't really look like weathered marble.  :)


I finger-dabbed white acrylic paint on the skeleton, then used a tiny brush with a super-watered-down brown to age him.  I painted one small section at a time, waited a beat or two then dabbed the excess of with a paper towel.


I covered the love potion "label" on the paper with Diamond Glaze and let it sit over night.  I'll be honest that I don't love this product since it's prone to air bubbles and is much thinner than Ranger Glossy Accents.  I'm working my way to the bottom of the bottle because I can't bring myself to throw it away.

The love potion paper and the various edges were cut out and glued in with Glue n Seal.  I used a scrap piece of wood for the base, and screwed it in.  (I'm moving away from just gluing these types of parts together; you don't have to!)


Here's a look at the finished GSL skeleton, creepy tree, and tombstones.  The piles of excess chipboard and the paper-covered pile of chipboard next to the skeleton are going to be used behind the pieces to create a 3D effect.


The tree was glued in then I layered the tombstones and "ground fog".  I used regular white glue for each of these layers.


The skelly boost was glued on the back, then I added him to the tin along with his party hat!  The shoulder reinforcement glue is visible in this photo also.  It was just a little bit, but it made me feel better.


Ta da!  It's party time!


Here's a look at the back. I will probably add more silver tinsel around the edges.


Thanks for your visit today!

Cheers,
Susan

GSL supplies used
Creepy Tree 5 Inch #D127D
Skeleton Shape Set D136S
Tiny Tombstones C55S

Other Supplies Used
3x5 tin
Scrap wood
Fancy Pants "Oct 31" paper
Cheese cloth
White gesso
Golden & Liquitex acrylic paints
Golden Micaceous Iron Oxide
Stickles glitter glue
Crafter's Pick white glue
Ranger Glue n Seal